1.Rest the VFOLD door upright on the floor positioned read for installation.
2.Fit the bearing set into the 12x16mm square hole at the base of the frame.
3.Insert the runner into the top rail by inclining the door panel by 60 degress and then bring it upright.
4.Use any tool with a diameter less than 4mm.Insert it into the black slot beside the rotating shaft of the VFOLD’s initial state.
5.Use the tool to slide the rotating shaft out into the round fixing hole in the top of the frame.
6.Once installed, the VFOLD door can be opened and shut smoothly.